Table 106: Show Dhcp Host Output Fields - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

3070230537 7000.0008.9365
3070230539 7000.000a.9365
3070230541 7000.000c.9365
3070230543 7000.000e.9365
3070230545 7000.0010.9365
3070230547 7000.0012.9365
3070230549 7000.0014.9365
3070230569 7000.0016.9365
3070230553 7000.0018.9365
3070230555 7000.001a.9365
3070230557 7000.001c.9365
To specify nonprintable byte codes in the circuit ID string or remote ID string, you
can use the string \\xab, where ab is a hex code of the byte. This show dhcp host
command uses the string \\xe3 to represent byte E3 in the circuit ID string. This
command displays information for the DHCP client bindings on virtual router vr3
with the specified circuit ID string, with results arranged in ascending order by IP
address.
To display information about DHCP external server bindings with a specified subnet
address:
host1:vr1#show dhcp host external 0.0.0.0
To display information about DHCP bindings with a specified IP prefix:
host1:vr1#show dhcp host ip prefix 10.2.0.0/28
To display information about DHCP relay proxy bindings without a lower-layer
interface:
host1:vr1#show dhcp host relay proxy no-interface
To display binding information for DHCP clients that match the specified remote ID
string:
host1:vr1#show dhcp host remote-id "remote id.*west"
Filtering the display of DHCP client bindings by the circuit ID string or remote ID
string is not supported for the DHCP external server application. DHCP external
server does not store information about the agent-circuit-id suboption or
agent-remote-id suboption of option 82.
Table 106 on page 543 lists the show dhcp host command output fields.
Meaning

Table 106: show dhcp host Output Fields

Field Name
BindingId
HwAddress
Type
Chapter 22: Monitoring and Troubleshooting DHCP
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
Field Description
Client binding ID
MAC address of client
Binding type; external (DHCP external server), local (DHCP local
server), or relay-p (DHCP relay proxy)
Monitoring DHCP Binding Host Information
71.1.0.10 bound
71.1.0.12 bound
71.1.0.14 bound
71.1.0.16 bound
71.1.0.18 bound
71.1.0.20 bound
71.1.0.22 bound
71.1.0.24 bound
71.1.0.26 bound
71.1.0.28 bound
71.1.0.30 bound
543