Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 304

JUNOSe 11.0.x Broadband Access Configuration Guide
Table 50: Juniper Networks (Vendor ID 4874) VSA Formats (continued)
Attribute
Number Attribute Name
[26-60] Med-Ip-Address
[26-61] Med-Port-Number
[26-62] MLPPP-Bundle-Name
[26-63] Interface-Desc
[26-64] Tunnel-Group
[26-65] Activate-Service
[26-66] Deactivate-Service
[26-67] Service-Volume-tagX
[26-68] Service-Timeout-tagX
[26-69] Service-Statistics-tagX
[26-70] Ignore-DF-Bit
[26-71] IGMP-Access-Name
[26-72] IGMP-Access-Src-Name
[26-73] IGMP-OIF-Map-Name
[26-74] MLD-Access-Name
[26-75] MLD-Access-Src-Name
[26-76] MLD-OIF-Map-Name
[26-77] MLD-Version
264
Juniper Networks VSAs
Description
IP address of analyzer device to which
mirrored packets are forwarded
UDP port in the analyzer device to which
mirrored packets are forwarded
Text string that identifies the Multilink PPP
bundle name
Text string that identifies the subscriber's
access interface
Name of the tunnel group assigned to a
domain map
Service to activate for the subscriber
Service to deactivate for the subscriber
Amount of traffic, in MB, that can use the
service; service is deactivated when the
volume is exceeded
Number of seconds that the service can be
active; service is deactivated when the
timeout expires
Enable or disable statistics for the service
Enable or disable the ignore don't fragment
(DF) bit feature on a B-RAS user's interface
Access List to use for the group (G) filter
Access List to use for the source-group (S,G)
filter
Multicast OIF (outgoing interface) mapping
Access List to use for the group (G) filter
Access List to use for the source-group (S,G)
filter
Multicast OIF (outgoing interface) mapping
MLD Protocol Version (MLD Version 1 =
1; MLD Version 2 = 2)
Subtype
Length Length Value
len sublen Salt encrypted IP
address
len sublen Salt encrypted integer
len sublen string:mlppp-bundle-
name
len sublen string:interface-
description
len sublen string:tunnel-group-
name
len sublen string:service-name
len sublen string:service-name
12 6 integer: volume in
MB; 0 = infinite
volume
12 6 integer: time in
seconds; 0 = no
timeout
12 6 integer: 0 = disable;
1 = enable time
statistics;
2 = enable time and
volume statistics
12 6 integer: 0 = disable;
1 = enable
len sublen string:32-octet
len sublen string:32-octet
len sublen string:32-octet
len sublen string:32-octet
len sublen string:32-octet
len sublen string:32-octet
12 6 integer:1-octet