Figure 30: Qos Configuration Dependency Chain; Removing Qos Configurations Referenced By Service Manager; Qos For Service Manager Considerations - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual
For e series broadband services routers - broadband access configuration
Hide thumbs
Also See for JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010:
- Configuration manual (712 pages)
Table of Contents
Advertisement
JUNOSe 11.0.x Broadband Access Configuration Guide
Conversely, QoS profiles and parameter instances configured through the CLI, SNMP,
or the SRC software can be overwritten by any source.
Removing QoS Configurations Referenced by Service Manager
When Service Manager no longer references a QoS configuration, it must be removed
from the service definition.
Figure 30 on page 652 shows the references for QoS configurations.
Figure 30: QoS Configuration Dependency Chain
Service Manager automatically removes QoS profiles and parameter instances. After
removing the QoS profile and parameter instances, Service Manager automatically
removes the following QoS configurations in the following order:
1.
2.
3.
4.
5.
Service Manager does not automatically remove the following QoS configurations:
QoS for Service Manager Considerations
When you specify QoS configurations in Service Manager, the following considerations
apply.
652
Referencing QoS Configurations in Service Definitions
QoS profiles
Scheduler profiles
Queue profiles
Drop profiles
Statistics profiles
Parameter definitions
Traffic classes
Traffic-class groups
QoS-port-type profiles
Advertisement
Table of Contents
Troubleshooting
