Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 321

Table 54: Default L2TP Mappings (continued)
L2TP Terminate Reason
tunnel failover protocol recovery control channel failed
tunnel failover protocol recovery tunnel failed
tunnel failover protocol recovery tunnel finished
tunnel failover protocol recovery tunnel primary down
tunnel failover protocol session resync failed
tunnel host profile changed
tunnel host profile deleted
tunnel rx scccn authenticate failed challenge
tunnel rx scccn avp bad hidden
tunnel rx scccn avp bad value challenge response
tunnel rx scccn avp malformed bad length
tunnel rx scccn avp malformed truncated
tunnel rx scccn avp missing challenge response
tunnel rx scccn avp missing random vector
tunnel rx scccn avp missing secret
tunnel rx scccn avp unexpected challenge response
tunnel rx scccn avp unknown
tunnel rx scccn no resources
tunnel rx scccn session id not null
tunnel rx scccn unexpected
tunnel rx sccrp authenticate failed challenge
tunnel rx sccrp authenticate failed host
tunnel rx sccrp avp bad hidden
tunnel rx sccrp avp bad value assigned tunnel id
tunnel rx sccrp avp bad value bearer capabilities
tunnel rx sccrp avp bad value challenge
Chapter 7: Application Terminate Reasons
RADIUS Acct-Terminate-Cause
Code Description
15 service unavailable
15 service unavailable
1 user request
1 user request
15 service unavailable
6 admin reset
6 admin reset
17 user error
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
17 user error
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
17 user error
17 user error
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
L2TP Terminate Reasons
281