Acct-Input-Gigawords; Output-Gigawords; Event-Timestamp - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Broadband Access Configuration Guide

[52] Acct-Input-Gigawords

Use the following command to manage the Acct-Input-Gigawords RADIUS attribute.
radius include input-gigawords

[53] Output-Gigawords

Use the following command to manage the Acct-Output-Gigawords RADIUS attribute.
radius include output-gigawords

[55] Event-Timestamp

Use the following command to manage the Acct-Output-Gigawords RADIUS attribute.
radius include event-timestamp
202
CLI Commands Used to Modify RADIUS Attributes
radius include input-gigawords
Use to include the Acct-Input-Gigawords attribute in Acct-Stop messages.
You can control inclusion of the Acct-Input-Gigawords attribute by enabling or
disabling this command.
See radius include
Example
host1(config)#radius include input-gigawords acct-stop disable
Use the no version to restore the default, enable.
radius include output-gigawords
Use to include the Acct-Output-Gigawords attribute in Acct-Stop messages.
You can control inclusion of the Acct-Output-Gigawords attribute by enabling or
disabling this command.
See radius include
Example
host1(config)#radius include output-gigawords acct-stop enable
Use the no version to restore the default, enable.
radius include event-timestamp
Use to include the Event-Timestamp attribute in Acct-Start, Acct-Stop, Acct-On,
or Acct-Off messages.