Table 52: Radius Attribute Passed Through By Junose Software; Radius Attributes References - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual
For e series broadband services routers - broadband access configuration
Hide thumbs
Also See for JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010:
- Configuration manual (712 pages)
Table of Contents
Advertisement
JUNOSe 11.0.x Broadband Access Configuration Guide
Table 52: RADIUS Attribute Passed Through by JUNOSe Software
RADIUS Attributes References
For more information about RADIUS attributes, see the following RFCs:
NOTE: IETF drafts are valid for only 6 months from the date of issuance. They must
be considered as works in progress. Please refer to the IETF Web site at
http://www.ietf.org for the latest drafts.
272
RADIUS Attributes References
Standard
Number
Attribute Name
[79]
EAP-Message
RFC 2661 Layer Two Tunneling Protocol " L2TP" (August 1999)
RFC 2865 Remote Authentication Dial In User Service (RADIUS) (June 2000)
RFC 2866 RADIUS Accounting (June 2000)
RFC 2867 RADIUS Accounting Modifications for Tunnel Protocol Support (June
2000)
RFC 2868 RADIUS Attributes for Tunnel Protocol Support (June 2000)
RFC 2869 RADIUS Extensions (June 2000)
RFC 3748 Extensible Authentication Protocol (EAP) (June 2004)
RFC 4679 DSL Forum Vendor-Specific RADIUS Attributes (September 2006)
Description
Used by RADIUS relay servers
Passed through to the RADIUS server
Advertisement
Table of Contents
Troubleshooting
