Configuring Radius Relay Server Support - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

the subscriber is authenticated. The second domain is created for the connection
between the E Series router and the SRC software.
If you want to continue to use the SRC software's user session and problem-tracking
features, you should not configure the SRC software to generate RADIUS accounting
records. Also, the following attributes must be configured on the RADIUS server used
by the WAP:

Configuring RADIUS Relay Server Support

To configure the RADIUS relay server feature, you enable support for the feature on
the E Series router and identify the key (secret) used for the connection between the
WAP and the RADIUS relay server. The following example configures a RADIUS relay
authentication server. Use similar steps to configure a RADIUS relay accounting
server.
NOTE: The E Series router supports one instance of the RADIUS relay server per
virtual router. The instance can provide authentication, authorization, and accounting
support.
1.
2.
3.
4.
Service-Bundle [26-31]
Class [25]
User-Name [1]
Enable RADIUS relay server support on the E Series router, and enter RADIUS
Relay Configuration mode.
host1(config)#radius relay authentication server
host1(config-radius-relay)#
Specify the IP address and mask of the network that will use the relay
authentication server, and the secret used during exchanges between the relay
authentication server and clients (the WAPs).
host1(config-radius-relay)#key 192.168.25.9 255.255.255.255 mysecret
Specify the router's User Datagram Protocol (UDP) port on which the RADIUS
relay server listens.
host1(config-radius-relay)#udp-port 1812
(Optional) Verify the configuration.
host1(config-radius-relay)#exit
host1(config)#exit
host1#show radius relay servers
RADIUS Relay Authentication Server Configuration
------------------------------------------------
IP Address IP Mask
------------- ---------------
Chapter 5: Configuring RADIUS Relay Server
Secret
---------
Configuring RADIUS Relay Server Support
249