Table 86: Show L2Tp Destination Profile Output Fields - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

Table 86: show l2tp destination profile Output Fields

Field Name
Destination profile attributes
Transport
Virtual Router
Peer address
Destination profile maximum
sessions
Destination profile current session
count
Host profile attributes
Remote host
Local hostname
Local IP address
Bundled group id
Tunnel password
Interface profile
Proxy lcp
mlppp upper binding type
Disconnect-cause avp generation
Receive window size
Maximum sessions
Failover resync
Override
out-of-resource-result-code
Current session count
Chapter 16: Monitoring L2TP and L2TP Dial-Out
Field Description
Destination profile attributes of L2TP destination
Method used to transfer traffic
Method used to transfer traffic
IP address of the LAC
Maximum number of sessions allowed for the
destination profile
Number of current sessions for the destination profile
Host profile attributes of L2TP destination
Name of the remote host
Name of the local host
IP address of the local host
Identifier for bundled sessions
Password for the tunnel
Name of the host profile
Status of proxy LCP for the remote host
Default upper binding type
Status of the disconnect cause generation
Number of packets that the peer can transmit without
receiving an acknowledgment from the router
Maximum number of sessions allowed for the host
profile
L2TP peer resynchronization method for the host
profile
State of result code override, enabled or disabled
Number of current sessions for the host profile
Monitoring Configured Destination Profiles or Host Profiles
433