Table 80: Show Aaa Domain-Map Output Fields; Monitoring The Mapping For User Domains And Virtual Routers With Aaa - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Broadband Access Configuration Guide

Monitoring the Mapping for User Domains and Virtual Routers with AAA

Display the mapping between user domains and virtual routers.
Purpose
To display the mapping between user domains and virtual routers:
Action
host1#show aaa domain-map
Domain: lac-tunnel; router-name: lac; ipv6-router-name: default
Tunnel
------
5
Tunnel
------
5
Tunnel
------
5
Table 80 on page 422 lists the show aaa domain-map command output fields.
Meaning

Table 80: show aaa domain-map Output Fields

422
Monitoring the Mapping for User Domains and Virtual Routers with AAA
Tunnel
Tag Tunnel Peer Source
----------- ------
192.168.1.1 <null>
Tunnel
Tunnel Server
Tag Client Name Name
----------- ------
lac boston
Tunnel Tunnel
Virtual Failover
Tag Router Resync
------- --------
<null> <null>
Field Name
Domain
router-name
router-mask
tunnel-group
ipv6-router-name
local-interface
ipv6-local-interface
poolname
IP hint
strip-domain
Tunnel Tunnel Tunnel
Type Medium Password
------ ------ --------
l2tp ipv4 welcome
Tunnel
Tunnel Max
Preference Sessions
---------- --------
5 0
Tunnel
Tunnel Tx
Switch Speed
Profile Method
--------- ------
denver qos
Field Description
Name of the domain
Virtual router to which user domain name is mapped
IPv4 mask of the local interface
Name of the tunnel group assigned to the domain
map
IPv6 virtual router to which user domain name is
mapped
Interface information to use on the local (E Series)
side of the subscriber's interface
IPv6 interface information to use on the local (E
Series) side of the subscriber's interface
Local address pool from which the router allocates
addresses for this domain
IP hint is enabled
Strip domain is enabled
Tunnel Id
-----------
lac-tunnel
Tunnel RWS
--------------
4