Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 331

Table 55: Default PPP Mappings (continued)
PPP Terminate Reason
ip no peer secondary dns address
ip no peer secondary nbns address
ip no service
ip peer renegotiate rx conf ack
ip peer renegotiate rx conf nak
ip peer renegotiate rx conf rej
ip peer renegotiate rx conf req
ip peer terminate term ack
ip peer terminate code rej
ip peer terminate term req
ip service disable
ip stale stacking
ipv6 admin disable
ipv6 inhibited by authentication
ipv6 link down
ipv6 local and peer interface ids identical
ipv6 max configure exceeded
ipv6 no local ipv6 interface id
ipv6 no peer ipv6 interface id
ipv6 no service
ipv6 peer renegotiate rx conf ack
ipv6 peer renegotiate rx conf nak
ipv6 peer renegotiate rx conf rej
ipv6 peer renegotiate rx conf req
ipv6 peer terminate code rej
ipv6 peer terminate term ack
Chapter 7: Application Terminate Reasons
RADIUS Acct-Terminate-Cause
Code Description
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
PPP Terminate Reasons
291