Referencing Qos Configurations In Service Definitions; Specifying Qos Profiles In A Service Definition; Configuring A Qos Profile For Service Manager - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

For e series broadband services routers - broadband access configuration
Hide thumbs Also See for JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010:
Table of Contents

Advertisement

Referencing QoS Configurations in Service Definitions

You can use QoS profiles and QoS parameters to define a service for a subscriber.
For example, you can configure the shaping rate for traffic in a video service by using
a QoS parameter instance.
To transmit the QoS configuration to the subscriber interface (that is, the forwarding
interface at the top of the interface column), you must configure the QoS profiles
and QoS parameter instances in static profiles.

Specifying QoS Profiles in a Service Definition

You can configure one QoS profile per subscriber interface. We recommend that you
specify the QoS profile in the first set of services applied to the subscriber's interface.
You can modify the QoS profile by modifying configurations referenced by the QoS
profile, including QoS parameter instances. You can also attach a new QoS profile
when activating a service, but make sure that the QoS profile is attached to the
subscriber's interface.
For more information about configuring QoS profiles, see the Configuring and Attaching
QoS Profiles to an Interface chapter in JUNOSe Quality of Service Configuration Guide.

Configuring a QoS Profile for Service Manager

To configure a QoS profile for Service Manager:
1.
2.
3.
profile
Configure the profile.
host1(config)#profile videoService
Configure the QoS profile.
host1(config-profile)#qos-profile videoBandwidth1
(Optional) Complete the QoS profile configuration described in the Configuring
and Attaching QoS Profiles to an Interface chapter in JUNOSe Quality of Service
Configuration Guide.
Use to create a profile and enter Profile Configuration mode.
You specify a profile name with up to 80 alphanumeric characters.
Example
host1(config)#profile iptv
host1(config-profile)#
Use the no version to remove a profile.
See profile
Referencing QoS Configurations in Service Definitions
Chapter 27: Configuring Service Manager
645

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.0.x

Table of Contents