Table 59: Show Radius Dynamic-Request Statistics Output Fields; Monitoring Radius Dynamic-Request Server Statistics - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

There is no no version.
Related Topics

Monitoring RADIUS Dynamic-Request Server Statistics

Display RADIUS dynamic-request server statistics.
Purpose
To display RADIUS dynamic-request statistics:
Action
host1#show radius dynamic-request statistics
-----------------------------
UDP Port
Disconnect Requests
Disconnect Accepts
Disconnect Rejects
Disconnect No Session ID
Disconnect Bad Authenticators
Disconnect Packets Dropped
CoA Requests
CoA Accepts
CoA Rejects
CoA No Session ID
CoA Bad Authenticators
CoA Packets Dropped
No Secret
Unknown Request
Invalid Addresses Received
Table 59 on page 305 lists the show radius dynamic-request statistics command
Meaning
output fields.

Table 59: show radius dynamic-request statistics Output Fields

Monitoring RADIUS Dynamic-Request Server Statistics on page 305
baseline radius dynamic-request
RADIUS Request Statistics
-------------------------
Statistic
Field Name
Udp Port
Disconnect or CoA Requests
Disconnect or CoA Accepts
Disconnect or CoA Rejects
Disconnect or CoA No Session ID
10.10.3.4
-------
1700
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:0
Field Description
Port on which the router listens for RADIUS server
RADIUS-initiated disconnect or CoA requests received
RADIUS-initiated disconnect or CoA requests accepted
RADIUS-initiated disconnect or CoA requests rejected
RADIUS-initiated disconnect or CoA messages
rejected because the request did not include a session
ID attribute
Monitoring RADIUS Dynamic-Request Server Statistics
Chapter 8: Monitoring RADIUS
305