Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 485

For e series broadband services routers - broadband access configuration
Hide thumbs Also See for JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010:
Table of Contents

Advertisement

Table 94: show l2tp dial-out Output Fields (continued)
Field Name
Current sessions in the process
of connecting
Maximum sessions connecting at
one time
Current sessions pending
Maximum sessions pending
Current targets inhibited
Maximum targets inhibited
Authentication grant for
nonexistent session
Authentication deny for
nonexistent session
Dial-out Virtual router statistics
Virtual routers active
Virtual routers created
Virtual routers removed
Virtual routers in init-pending
state
Virtual routers in init-failed state
Virtual routers in down state
Virtual routers in in-service state
IP Discarded trigger frames
Trigger frames received for
unknown route
Sessions in dormant state
Sessions in pending state
Sessions in authenticating state
Sessions in connecting state
Sessions in in-service state
Chapter 16: Monitoring L2TP and L2TP Dial-Out
Field Description
Sessions currently in the connecting state
Highest number of sessions recorded on the chassis
at the same time since the last router restart
Sessions in the pending state
Highest number of sessions recorded in the pending
state since the last router restart
Targets currently in the inhibited state
Highest value of targets recorded in the inhibited
state since the last router restart
Number of authentication requests granted to
nonexistent sessions
Number of authentication requests denied to
nonexistent sessions
Statistics at the virtual router level
VRs in use by the state machine
VRs that have been used by the state machine
VRs no longer used by the state machine
VRs in the initializationPending state
VRs in the initializationFailed state
VRs in the down state
VRs in the inService state
Trigger frames that IP discarded
Trigger frames received for an unknown route
Sessions on the VR that are in the dormant state
Sessions on the VR that are in the pending state
Sessions on the VR that are in the authenticating state
Sessions on the VR that are in the connecting state
Sessions on the VR that are in the inService state
Monitoring Chassis-wide Configuration for L2TP Dial-out
445

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.0.x

Table of Contents