Table 39: Aaa Accounting Message Radius Ietf Attributes Supported - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Broadband Access Configuration Guide
4.
5.

Table 39: AAA Accounting Message RADIUS IETF Attributes Supported

Attribute
Number Attribute Name
[1] User-Name
[4] NAS-IP-Address
[5] NAS-Port
[6] Service-Type
[7] Framed-Protocol
(See Note 3.)
[8] Framed-IP-Address
(See Note 2.)
[9] Framed-IP-Netmask
[13] Framed-Compression
(See Note 3.)
[25] Class
[30] Called-Station-Id
[31] Calling-Station-Id
[32] NAS-Identifier
[40] Acct-Status-Type
[41] Acct-Delay-Time
[42] Acct-Input-Octets
[43] Acct-Output-Octets
[44] Acct-Session-Id
[45] Acct-Authentic
[46] Acct-Session-Time
[47] Acct-Input-Packets
[48] Acct-Output-Packets
[49] Acct-Terminate-Cause
176
Subscriber AAA Accounting Messages
For this attribute to be included, an IPv6 interface ID must be assigned to the
subscriber.
For this attribute to be included, at least one IPv6 prefix must be assigned to the
subscriber.
Acct-Start Acct-Stop
–
–
–
–
–
–
Interim-Acct Acct-On
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
– –
Acct-Off
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–