Table 53: Default Aaa Mappings; Chapter 7 Application Terminate Reasons; Aaa Terminate Reasons - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

Chapter 7
Application Terminate Reasons

AAA Terminate Reasons

This chapter lists the default mappings for application terminate reasons to RADIUS
Acct-Terminate-Cause attributes. Table 53 on page 273 lists the default mappings for
AAA, Table 54 on page 274 lists default mappings for L2TP, Table 55 on page 289 lists
the default mappings for PPP, and Table 56 on page 295 lists default mappings for
RADIUS client. See "Mapping Application Terminate Reasons to RADIUS Terminate
Codes" on page 84 in "Configuring Remote Access" on page 3 for information
about configuring custom mappings for application terminate reasons to RADIUS
Acct-Terminate-Cause attributes.
AAA Terminate Reasons on page 273
L2TP Terminate Reasons on page 274
PPP Terminate Reasons on page 289
RADIUS Client Terminate Reasons on page 295
Table 53 on page 273 lists the default AAA terminate mappings. The table indicates
the supported AAA terminate and deny reasons and the RADIUS Acct-Terminate-Cause
attributes they are mapped to by default.

Table 53: Default AAA Mappings

AAA Shutdown or Deny Reason
deny address allocation failure
deny address assignment failure
deny application error
deny authentication denied
deny authentication failure
deny authorization failure
deny incompatible request
RADIUS Acct-Terminate-Cause
Code Description
17 user error
17 user error
17 user error
17 user error
17 user error
17 user error
17 user error
AAA Terminate Reasons
273