Dhcp-Options; Dhcp-Mac-Address; Dhcp-Gi-Address - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual
For e series broadband services routers - broadband access configuration
Hide thumbs
Also See for JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010:
- Configuration manual (712 pages)
Table of Contents
Advertisement
JUNOSe 11.0.x Broadband Access Configuration Guide
[26-55] DHCP-Options
Use the following command to manage the DHCP-Options RADIUS attribute.
radius include dhcp-options
[26-56] DHCP-MAC-Address
Use the following command to manage the DHCP-MAC-Address RADIUS attribute.
radius include dhcp-mac-address
[26-57] DHCP-GI-Address
Use the following command to manage the DHCP-GI-Address RADIUS attribute.
222
CLI Commands Used to Modify RADIUS Attributes
Example
host1(config)#radius include profile-service-description acct-stop enable
Use the no version to restore the default, disable.
radius include dhcp-options
Use to include the DHCP-Options attribute in Access-Request, Acct-Start, and
Acct-Stop messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include dhcp-options acct-stop enable
Use the no version to restore the default, disable.
radius include dhcp-mac-address
Use to include the DHCP-MAC-Address attribute in Access-Request, Acct-Start,
and Acct-Stop messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include dhcp-mac-address acct-stop enable
Use the no version to restore the default, disable.
Advertisement
Table of Contents
Troubleshooting
