Table of Contents
Advertisement
See "Loading Printer Fonts" and "Turning the Start-up Page Off of
On" later in this chapter for more details.
XANTÉ Command Center
The Command Center utility provides a quick, easy way to perform
many functions on your printer, such as changing the printer's name
and calibrating the print engine. See "Installing XANTÉ Command
Center" later in this chapter for details
Downloads Folder
The Downloads folder contains the following PostScript files to set
up your printer for your working environment.
Initialize Disk.ps
This file is used to initialize an external hard disk attached to the
SCSI interface on your Accel-a-Writer 812 printer. For more details,
see "Initializing the Hard Disk" in chapter 2.
Parmdump.ps
This file causes pages to print which list all the system parameters. If
you call XANTÉ Technical Support, you may be asked to print this
page to check your system setup.
Sysparm.ps
This file causes a page to print which lists the current system
parameters (such as memory allocations and timeouts) and tray
selections. If you call XANTÉ Technical Support, you may be asked
to print this page to check your setup.
_____________________________________
Macintosh Setup 3-7
Advertisement
Table of Contents
Troubleshooting
