Configuring The Ppd - Xante FilmMaker 4 User Manual

2. Double-click the Utilities CD-ROM icon.
3. Go to the OS8_9: Printer Descriptions folder.
4. Drag the XANTÉ FilmMaker 4 file for your printer into the System Folder:
Extensions: Printer Descriptions folder on your Macintosh.

Configuring the PPD

1. Select Chooser from the Apple menu. The Chooser window appears (fig. 2.41).
Fig. 2.41 Chooser Window
2. Select AdobePS from the box on the left (top left in a network environment); a
list of available printers appears to the right.
If the printer does not appear in the list, verify that
• the printer is on and cable connections are secure.
• your system is configured for EtherTalk (see "Configuring EtherTalk"
earlier in this chapter).
• your Macintosh is setup for EtherTalk in the AppleTalk Control panel.
3. Highlight your printer and click Create. If the setup reminder dialog box
appears, click OK. The Adobe PostScript printer driver automatically selects
and configures the correct PPD for your printer.
If multiple PPDs are installed for your printer, select the correct PPD when prompted.
4. Close the Chooser window to complete the PPD setup unless the Autosetup
Failed message window appears (fig. 2.43). If this window appears, continue
with step 5.
2-18 Macintosh Setupbb
Fig. 2.42 Select AdobePS