Cleaning The Printer - Xante Accel-a-Writer 3 Series User Manual

1. Turn off the printer; then unplug the power cord from the
power source.
2. Remove all media from the multipurpose feeder and close it
and, if necessary, the top cover. See chapter 2 for instructions.
3. Remove any installed optional feeder or duplexer (see chapter
10, "Options," for details). Never move the printer with an
optional feeder or the optional duplexer installed.
4. Remove the toner cartridge following the procedure in chapter
2. Never move the printer with the cartridge installed.
a. Place the cartridge in its original bag to protect it from
light. If you no longer have this bag, place the cartridge in
a dark bag or wrap it in a dark cloth.
b. Ensure the cartridge stays level during the move. Rock it
gently to redistribute toner before reloading the cartridge
in the printer. See "Toner Cartridge" in chapter 2.
5. Remove all interface cables and the power cord.
6. Move the printer to a location that meets the guidelines in
"Printer Location" in chapter 2.
7. Set up the printer following the instructions in chapter 2.

Cleaning the Printer

To help keep your printer running smoothly and avoid unnecessary
problems, perform the following cleaning steps monthly. Also, clean
the printer inside after removing a paper jam or replacing the toner
cartridge.
Fuser Assembly Cleaning
1. Turn off and unplug the printer.
_________________________ Maintenance and Specifications 9-5