Removing A Duplexer - Xante Accel-a-Writer Accel-a-Writer 3DN Supplementary Manual

Xante accel-a-writer accel-a-writer 3dn: supplementary guide

Hide thumbs Also See for Accel-a-Writer Accel-a-Writer 3DN:

Fig. 15 Remove the Allen Screws

Unlock the casters on the front bottom of the feeder (fig. 17). Turn the locking key on the top of the

feeder clockwise to relock it (fig. 18).

Fig. 17 Unlock the Feeder's Casters

Repack the feeder in the original box, making sure to include the 2 footers, 2 IOT screws, 4 Allen

screws, and the Allen wrench.

Note: If you are not shipping the 2,000 sheet feeder, store it in a location that meets the guidelines for

storing the printer (see your printer user's guide.)

Removing a Duplexer

If a duplexer is attached to your printer, it must be removed before the printer is shipped.

Remove the paper guide (fig. 19) and loosen the 2 screws holding the duplexer to the printer (fig. 20).

Fig. 19 Remove the Paper Guide

________________________________________________________________

Fig. 16 Detach the Footers

Fig. 18 Lock the Feeder's Locking key.

Fig. 20 Loosen the Duplexer Screws

Repacking Procedure 7

Table of Contents