Chapter 1
Installation and Removal
Attach The Grounding Wire And Power/Data Cable
Power/Data Cable
(Long Connector)
A
A
Validator
(Front View)
Figure 10. Attaching the Grounding Wire and Power/Data Cable
1. Attach one end of the grounding wire to the validator using the
2. Attach the other end of the grounding wire to the lower bracket
3. Push any excess grounding wire slack through the grommet.
24
Grounding
Wire
Bracket Mounting Screw
Inside
Adjustment
Screw
inside adjustment screw as shown in Figure 10.
using the fourth bracket mounting screw as shown in Figure 10.
Upper Bracket
Screw (3)
Cable
Channel
Bracket Tab
Grommet
Grounding Wire
Slack