View the Library State
The status bar at the top of the interface displays library health, which represents the
combined state of every component in the library.
•
Operative
•
Degraded
continue to function (such as a faulty drive).
•
Failed
robot).
Note:
Clicking the library state in the status bar displays the Library Health pop-up
which you can use to troubleshoot the library (see
Cause of a Degraded or Failed Library
Library LED Status Indicators
LEDs on the front control panel and rear of the library indicate status.
Indicator Indicator State
Indicator Locations
Figure 8-1
— the library is fully operational.
— a device in the library has failed or is offline, but the library can
— a device has failed and the library cannot function (such as a failed
Green OK is solid.
Green OK is solid.
Amber ! is solid.
Amber ! is solid.
LEDs on Front of Base Module
Determine the Possible
State).
Meaning
The library or component is fully operational.
The library or component is degraded. It is still
operating but with reduced functionality.
The library or component has failed and cannot
perform its function.
Chapter 8
View the Library State
8-2
Need help?
Do you have a question about the SL150 and is the answer not in the manual?