Appendix B: Oracle Fs System Led Status; Oracle Fs System Leds; Controller Led Indicators - Oracle FS1-2 Customer Service Manual

A B
PPENDIX
Oracle FS System LED Status

Oracle FS System LEDs

An Oracle FS System includes LEDs to indicate the status of the hardware
components. To restore reliability to the Oracle FS System, locate the specific
failed component so that you can replace it. Hardware LED configuration helps
you identify the failed component.
Important: If you cannot locate the hardware component that must be replaced,
contact Oracle Customer Support.
The Guided Maintenance feature of the Oracle FS System Manager triggers the
chassis with the failed component to blink, or it triggers all of the other chassis to
blink, except for the one with the failed component. This blinking pattern helps
you to identify component status.
Note: LED interpretations in this appendix apply to a system after it has been
powered on.
Related Links

Controller LED Indicators

Drive Enclosure LED Indicators
Pilot LED Indicators
Pilot Drive LED Indicators
Pilot Fan LED Indicators
Pilot Port LED Indicators
Pilot Motherboard LED Indicators
Pilot Power Supply LED Indicators
Controller LED Indicators
The LED alarm assembly is a high-level status indicator of the Controller and
Controller components. Use these diagnostic LEDs to determine if a component
has failed in the Controller. The LED alarm assembly also includes a power
button to power on the Controller. Besides, the LED alarm assembly there is the
Controller Identification Display (CID) that identifies the Controller by its
numeric identifier.
The following figure shows the front display panel of the LED alarm assembly
on the Controller:
241