Hardware Breakpoint Setting Window - Renesas M30290T2-CPE User Manual

M30290T2-CPE User's Manual

3.6 Hardware Breakpoint Setting Window

(1) Breakpoint setup dialog box
1. Opening the hardware breakpoint setup dialog box
2. Hardware Break Point Setting Window in initial state
3. Opening the break event setting dialog box
REJ10J0494-0200 Rev.2.00 July 16, 2005
3. Usage (How to Use the Emulator Debugger)
Hardware Break Point
Clicking this button opens the hardware breakpoint setup
dialog box.
H/W breakpoint Setting Window in initial
state
Select the "Enable H/W Break" check box, and this break
function will be enabled, allowing you to set hardware
breakpoints.
Setting Break Event
Click the event line at which you want set a break event.
Page 54 of 86