Setting Up The System; Installing The Network Interface Module - Polycom VSX 7000 Administrator's Manual

Setting Up the System

Installing the Network Interface Module

© Polycom, Inc.
The tasks involved in setting up the system are:
Installing the optional network interface module in the equipment,
Positioning the equipment,
Connecting the required peripherals, and
Connecting optional peripherals.
If you received a network interface module with the system, you may find it
convenient to install it before positioning the system.
To install the network interface module in the back of the VSX 7000
subwoofer:
1. Loosen the captive screws holding the cover plate in place, and remove it.
2. Slide the network interface module into the opening, and press firmly to seat
the connector.
3. Tighten the captive screws to secure the network interface module in the
subwoofer.
If your ISDN network requires additional equipment such as an NT-1 device,
ensure that it is available, along with all cables required.
Chapter 2 - Setting Up the Equipment
19