Place A Video Call; Place A Lync Video Call; Stop Sending Video; Handling Conference Calls With Video - Polycom RealPresence Trio 8800 User Manual

Polycom RealPresence Trio Solution User Guide

Place a Video Call

You can place a video call to one contact or show video during a conference call.
To place a video call:
1 Tap Place A Call, enter a number or select a contact from Contacts or Recent Calls.
2 Tap or tap Dial.

Place a Lync Video Call

When you are registered with Lync 2013 Server, you can place a video call to your Skype for Business
contacts. Video displays automatically for up to six contacts, as long as those contacts have video enabled
and are streaming video.
To place a video call:
1 Tap Place A Call, enter a number or select a contact from Contacts or Recent Calls.
2 Tap or tap Dial.

Stop Sending Video

You can stop transmitting video at any time during a call. Stopping video does not create an audio-only call.
To stop sending video during a call:
» Tap and tap Video Mute.
The stop video icon
Note: How can I stop far-side video?
You can't start and stop far-side video. If the system is set up to receive far-side video, the far-side
video always displays.

Handling Conference Calls with Video

When you set up a conference, the system displays video for only one conference participant at a time, even
if more than one participant can send video. The person whose video you see is the active speaker or the
last person with video enabled who joined the conference.
Note: Is it possible to view all video participants?
Viewing all video participants requires the use of a Polycom Video Conference Bridge. For more
information, contact your Polycom reseller.

Video Calls without a Camera

When you do not have a Logitech Webcam C930e attached to the RealPresence Trio Visual+, you can
receive video, but you cannot send video. Video always displays when the person you are talking with can
send video and the system is enabled to receive video.
Polycom, Inc.
is displayed and the far-side cannot see you.
48