Placing A Video Call On Hold; Resuming An On-Hold Video Call; Transferring A Video Call To Another Site; Ending A Video Call - Polycom VSX Series Getting Started Manual

Placing a Video Call on Hold

Resuming an On-hold Video Call

Transferring a Video Call to Another Site

Ending a Video Call

© Polycom, Inc.
To place a video call on hold:
1. Press Call on the remote control.
2. Select Hold from the Call Options menu.
The far site hears on-hold music and sees their local video.
You can place and receive other video calls while a call is on hold.
To resume an on-hold video call:
1. Press Call on the remote control.
2. Select Resume from the Call Options menu.
To transfer a video call to another site:
1. Press Call on the remote control.
2. Select Transfer from the Call Options menu.
3. Enter the destination number for the transfer or choose a number from
the Directory.
4. Press Call on the remote control.
To hang up from a call:
1. Press Hang Up on the remote control.
2. If prompted, confirm that you want to disconnect from the far site(s).
C A
ALLING AND NSWERING
5