Calling From The Contacts Or Speed Dial List; Calling From The Directory; Ending A Video Call - Polycom VSX3000 Getting Started Manual

Calling from the Contacts or Speed Dial List

Calling from the Directory

Ending a Video Call

© Polycom, Inc.
You may be able to access calling information for specific sites using the Speed
Dial or Contacts list on the home screen.
To place a call using the Speed Dial or Contacts list:
1. Select Speed Dial or Contacts from the home screen, if necessary.
2. Scroll to the entry you want to call.
3. Press Call to place the call.
The directory is a list of sites stored locally on the VSX system. If the system
is registered with a global directory, the directory also includes entries from
the global directory.
To place a call from the directory:
1. Press Directory on the remote control.
2. Find the entry to call.
3. Press Call to place the call.
For more information about using the directory, see Working with Directory Entries on
page 20.
Depending on your system configuration, when you make a call using an entry with both
ISDN and IP dialing information, the system may prompt you to choose which way to
place the call.
To hang up from a call:
1. Press Hang Up on the remote control.
2. Confirm that you want to end the call.
If you don't confirm that you want to hang up, the system disconnects the call
automatically after 60 seconds.
C A
ALLING AND NSWERING
5