Getting Started Guide for the V Series
Ending a Video Call
6
Calling from the Directory
The directory is a list of sites stored locally on the Polycom system. If the
system is registered with a global directory, the directory also includes entries
from the global directory.
To place a call from the directory:
1. Select Directory from the Place a Call screen.
2. Find the entry to call.
3. Press
Call to place the call.
Depending on your system configuration, when you make a call using an entry with
both ISDN and IP dialing information, the system may prompt you to choose which
way to place the call.
To hang up from a call:
1. Press
Hang Up on the remote control.
2. If prompted, confirm that you want to disconnect from the far site(s).
If you don't confirm that you want to hang up, the system disconnects the call
automatically after 60 seconds.
When hanging up, the system may prompt you to save the dialed number to the
local directory.
© Polycom, Inc.