Selecting The Rmx Web Client Languages - Polycom RMX 1500 Quick Installation And Configuration Manual

Selecting the RMX Web Client Languages

By default, the RMX Web Client interface is displayed only in English.
You can choose the languages available for selection on the Login screen.
1
On the RMX menu, click Setup > Multilingual Setting.
The Multilingual Setting dialog box is displayed.
2
Place check marks in the boxes of the languages to be available for
selection.
3
Click OK.
4
Log out and Log in for the customization to take effect.
The RMX is shipped with one Entry Queue and four Meeting Rooms:
• Entry Queue DefaultEQ whose ID is 1000, and it is used to access
the default Meeting Rooms
• Four Meeting Rooms whose IDs are 1001, 1002, 1003 and 1004.
The default conferencing entities are set to line rate of 384 kbps, Auto
Layout, Polycom Skin and have a default duration of one hour.
The default Entry Queue (EQ) is set to Ad Hoc conferencing which
allows participants to start new conferences without prior definition by
entering a Conference or Meeting Room ID other than those used for
any other conferencing entities defined or running on the MCU.
For IP conferencing, these conferencing entities can be used to start new
conferences without any additional settings.
If ISDN/PSTN endpoints are participating in the conferences an ISDN/
PSTN dial-in number must be manually assigned to the Conference,
Meeting Room or Entry Queue. For more information, see the RMX
1500/2000/4000 Administrator's Guide, "Modifying the EQ Properties" and
"ISDN/PSTN Network Services".
If additional Entry Queues and Meeting Rooms are required, for
example, for conferencing at different line rates, you can customize the
conferencing entities to your organization's requirements and define
additional conferencing entities. For more details, see the RMX 1500/
2000/4000 Administrator's Guide.
18
Conferencing Entities