Selecting The Rmx Web Client Languages - Polycom RMX 2000 Getting Started Manual

Chapter 2-First Time Installation and Configuration

Selecting the RMX Web Client Languages

2-30
The RMX requests confirmation of restart.
38 Click Yes.
39 The Please wait for system reset request is displayed.
40 Click OK.
By default, the RMX Web Client interface is displayed only in English.
However, the system administrator can choose the languages available
for selection on the Login screen. These kanguages are represented by
flags.
To choose the languages for selection in the Login screen:
1
On the RMX menu, click Setup > Multilingual Setting.
2 Click the ckeck boxes of the languages to appear in the Login scree
nof the RMX Web Client. For more information see the RMX 2000
Administrator's Guide "Multilingual Setting" on page 12-31.
If the selected language is not supported by the browser or the
workstation's Operating System, the RMX Web Client is displayed in
English.
3 Click OK.
4
Log out and reconnect to the RMX.
The Login screen will display the flags of the selected languages