Dialing Speeds - Polycom ViewStation EX User Manual

Polycom viewstation ex: user guide
Hide thumbs Also See for ViewStation EX:
Table of Contents

Advertisement

Chapter 2
© Polycom, Inc.
Figure 2-40. Gatekeeper Screen
Note
A gatekeeper is not required to make IP-to-IP Intranet calls.
If Specify or Auto is selected, one of three icons appears on the
ViewStation Main Calling screen when the ViewStation is rebooted.
These icons are:
Red GK (Gatekeeper) Down Arrow: Cannot find gatekeeper
Yellow GK Box: Found gatekeeper, but not allowed to
register
Green GK Up Arrow: Found gatekeeper and registered

Dialing Speeds

The Dialing Speeds screen (System Info > Admin Setup >
LAN/H.323 > Dialing Speeds) shown in Figure 2-41 is used to set
the H.323 and H.320 dialing speeds for the ViewStation.
Nx56 and Nx64 (left side of screen) represent the dialing speeds
for H.320 calls.
IPx56 and IPx64 (right side of screen) represent the dialing
speeds for H.323 calls.
The 2x options listed under IPx56 are used for gateway calls from
the ViewStation. Non-2x options provide connection speeds from 56
Kbps to 768 Kbps.
71
Optional Configurations
ViewStation User Guide

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ViewStation EX and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents