Network - H3C IE4300 Command Reference Manual

: Specifies the mixed node. An m-node client broadcasts the destination name. If it does not
m-node
receive a response, the m-node client unicasts the destination name to the WINS server to get the
mapping.
: Specifies the peer-to-peer node. A p-node client sends the destination name in a unicast
p-node
message to get the mapping from the WINS server.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify the NetBIOS node type as p-node in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] netbios-type p-node
Related commands
display dhcp server pool
nbns-list

network

Use
network
Use
undo network
Syntax
network network-address [ mask-length | mask mask ] [ secondary ]
undo network network-address [ mask-length | mask mask ] [ secondary ]
Default
No subnet is specified in a DHCP address pool.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
network-address
specified, the natural mask will be used.
mask-length
mask mask
secondary
command specifies the primary subnet. If the addresses in the primary subnet are used up, the
DHCP server can select addresses from a secondary subnet for clients.
Usage guidelines
You can use the
secondary subnet view, you can specify gateways by using the
DHCP clients in the secondary subnet.
to specify the subnet for dynamic allocation in a DHCP address pool.
to remove the specified subnet.
: Specifies the subnet for dynamic allocation. If no mask length or mask is
: Specifies the mask length in the range of 1 to 30.
: Specifies the mask in dotted decimal format.
: Specifies the subnet as a secondary subnet. If you do not specify this keyword, this
secondary
keyword to specify a secondary subnet and enter its view. In
41
command for
gateway-list