Default Ip-Pool - H3C IE4300 Command Reference Manual

Default
No IP address range is specified for a DHCP user class.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
class-name
the specified user class does not exist, the DHCP server will not assign the addresses in the address
range specified for the user class to any clients.
start-ip-address
end-ip-address
Usage guidelines
The class range
for different DHCP user classes. The address range for a user class must be within the primary
subnet specified by the
class, the DHCP server selects an address in the IP address range specified by the
command. If the address range has no assignable IP addresses or no address range is
range
configured, the address allocation fails.
After you specify an address range for a user class, you cannot use the
command to specify a secondary subnet in the address pool.
You can specify only one address range for a DHCP user class in an address pool. If you execute
this command multiple times for a DHCP user class, the most recent configuration takes effect.
Examples
# Specify an IP address range of 192.168.8.1 through 192.168.8.150 for DHCP user class user in
DHCP address pool 1.
<Sysname> system-view
[Sysname] dhcp server ip-pool 1
[Sysname-dhcp-pool-1] class user range 192.168.8.1 192.168.8.150
Related commands
address range
dhcp class
display dhcp server pool

default ip-pool

Use
default ip-pool
Use
undo default ip-pool
Syntax
default ip-pool pool-name
undo default ip-pool
Default
No default DHCP address pool is specified.
: Specifies a DHCP user class name, a case-insensitive string of 1 to 63 characters. If
: Specifies the start IP address.
: Specifies the end IP address.
command allows you to divide an address range into multiple address ranges
command. If the DHCP client does not match any DHCP user
network
to specify the default DHCP address pool.
to restore the default.
9
address
network secondary