Master-Server Switch-Delay; Remote-Server - H3C IE4300 Command Reference Manual

master-server switch-delay

Use
master-server switch-delay
set the switchback delay time.
Use
undo master-server switch-delay
Syntax
master-server switch-delay delay-time
undo master-server switch-delay
Default
The DHCP relay agent does not switch back to the master DHCP server.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
delay-time
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Configure the DHCP relay agent to switch back to the master DHCP server 3 minutes after it
switches to a backup DHCP server in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] master-server switch-delay 3
Related commands
remote-server algorithm

remote-server

Use
remote-server
Use
undo remote-server
Syntax
remote-server ip-address&<1-8>
undo remote-server [ ip-address&<1-8> ]
Default
No DHCP server is specified for the DHCP relay address pool.
Views
DHCP address pool view
Predefined user roles
network-admin
: Specifies the delay time in the range of 1 to 65535 minutes.
to specify DHCP servers for a DHCP relay address pool.
to remove DHCP servers from a DHCP relay address pool.
to enable the switchback to the master DHCP server and
to restore the default.
73