Class Ip-Pool - H3C IE4300 Command Reference Manual

<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bootfile-name http://10.1.1.1/boot.cfg
Related commands
display dhcp server pool
next-server
tftp-server domain-name
tftp-server ip-address

class ip-pool

Use
class ip-pool
Use
undo class ip-pool
Syntax
class class-name ip-pool pool-name
undo class class-name ip-pool
Default
No DHCP address pool is specified for a DHCP user class.
Views
DHCP policy view
Predefined user roles
network-admin
Parameters
class-name
characters.
pool-name
characters.
Usage guidelines
You can specify only one DHCP address pool for a DHCP user class in a DHCP policy. If you
execute this command multiple times for a user class, the most recent configuration takes effect.
Examples
# Specify DHCP address pool pool1 for DHCP user class test in DHCP policy 1.
<Sysname> system-view
[Sysname] dhcp policy 1
[Sysname-dhcp-policy-1] class test ip-pool pool1
Related commands
default ip-pool
dhcp policy
dhcp server ip-pool
to specify a DHCP address pool for a DHCP user class.
to remove the DHCP address pool specified for a DHCP user class.
: Specifies a DHCP user class by its name, a case-insensitive string of 1 to 63
: Specifies a DHCP address pool by its name, a case-insensitive string of 1 to 63
7