Dhcp Enable; Dhcp Log Enable - H3C IE4300 Command Reference Manual

Views
System view
Predefined user roles
network-admin
Parameters
dscp-value
Usage guidelines
The DSCP value of a packet specifies the priority level of the packet and affects the transmission
priority of the packet. A bigger DSCP value represents a higher priority.
Examples
# Set the DSCP value to 30 for DHCP packets sent by the DHCP server or the DHCP relay agent.
<Sysname> system-view
[Sysname] dhcp dscp 30

dhcp enable

Use
dhcp enable
Use
undo dhcp enable
Syntax
dhcp enable
undo dhcp enable
Default
DHCP is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
DHCP related configuration takes effect only after you enable DHCP.
Enable DHCP before you configure the DHCP server or relay agent.
Examples
# Enable DHCP.
<Sysname> system-view
[Sysname] dhcp enable

dhcp log enable

Use
dhcp log enable
Use
undo dhcp log enable
Syntax
dhcp log enable
: Specifies the DSCP value for DHCP packets, in the range of 0 to 63.
to enable DHCP.
to disable DHCP.
to enable DHCP server logging.
to disable DHCP server logging.
2