Dhcp Server Ip-Pool - H3C IE4300 Command Reference Manual

The address or address range specified in the
must be the same as that specified in the
IP address from the specified address range, you must remove the entire address range.
You can execute this command multiple times to exclude multiple IP address ranges from dynamic
allocation.
Examples
# Exclude the IP addresses of 10.110.1.1 through 10.110.1.63 from dynamic allocation globally.
<Sysname> system-view
[Sysname] dhcp server forbidden-ip 10.110.1.1 10.110.1.63
Related commands
forbidden-ip
static-bind

dhcp server ip-pool

Use
dhcp server ip-pool
of an existing DHCP address pool.
Use
undo dhcp server ip-pool
Syntax
dhcp server ip-pool pool-name
undo dhcp server ip-pool pool-name
Default
No DHCP address pools exist.
Views
System view
Predefined user roles
network-admin
Parameters
pool-name
The pool name uniquely identifies an address pool.
Usage guidelines
A DHCP address pool is used to store the configuration parameters to be assigned to DHCP clients.
Examples
# Create a DHCP address pool named pool1.
<Sysname> system-view
[Sysname] dhcp server ip-pool pool1
[Sysname-dhcp-pool-pool1]
Related commands
class ip-pool
dhcp server apply ip-pool
display dhcp server pool
to create a DHCP address pool and enter its view, or enter the view
: Specifies a DHCP address pool name, a case-insensitive string of 1 to 63 characters.
undo dhcp server forbidden-ip
dhcp server forbidden-ip
to delete the specified DHCP address pool.
20
command
command. To remove an