INVT Goodrive 310-UL Series Operation Manual page 70

GD310-UL series VFD
Function
Name
code
Vibration
control factor
at high
P04.24
frequency of
motor 2
Vibration
control
P04.25
threshold of
motor 2
Energy-saving
P04.26
operation
P04.27 Voltage setting
Keypad setting
P04.28
voltage
Voltage
P04.29 increasing
time
Voltage
P04.30 decreasing
time
canceled by adjusting this parameter.
Setting range of P04.23: 0–100
Setting range of P04.24: 0–100
Setting range of P04.25: 0.00Hz–P00.03 (max
frequency)
0: No operation
1: Automatic energy-saving operation
Motors will automatically adjust the output voltage to
save energy when light loads.
Select the output setting channel at V/F curve
separation.
0: Keypad: the output voltage is determined by
P04.28.
1: AI1;
2: AI2;
3: AI3;
4: HDI;
5: Multi-step speed;
6: PID;
7: MODBUS communication;
8: PROFIBUS/CANopen communication;
9: Ethernet communication;
10: Reserved
Note: 100% corresponds to the rated voltage of the
motor.
The function code is the voltage displaying when the
voltage is set through keypad.
The setting range: 0.0%–100.0%
Voltage increasing time is the time when the VFD
accelerates from the output minimum voltage to the
output maximum voltage.
Voltage decreasing time is the time when the VFD
decelerates from the output maximum voltage to the
output minimum voltage.
The setting range: 0.0–3600.0s
Description
-62-
Function parameter
Default
Modify
value
○
10
○
30.00Hz
◎
0
○
0
○
100.0%
○
5.0s
○
5.0s