Change Electrolytic Capacitors; Power Cable - INVT Goodrive 310-UL Series Operation Manual

GD310-UL series VFD

9.4.2 Change electrolytic capacitors


Change electrolytic capacitors if the working hours of electrolytic capacitors in the VFD are above
35000. Please contact the local offices or dial our national service hotline (400-700-9997) for detailed
operation.

9.5 Power cable


1. Stop the drive and disconnect it from the power line. Wait for at least the time designated on the
VFD.
2. Check the tightness of the power cable connections.
3. Restore power.
Power supply
380V-480V
Figure 9-1 460V charging illustration of the driven device
Read and follow the instructions in chapter Safety Precautions. Ignoring
the instructions may cause physical injury or death, or damage to the
equipment.
Read and follow the instructions in chapter Safety Precautions. Ignoring
the instructions may cause physical injury or death, or damage to the
equipment.
Maintenance and hardware diagnostics
-188-
R U
S V
VFD
T W