Applicable Standards; Ce Marking; Ul And Cul Marking; Compliance With The European Emc Directive - INVT Goodrive 310-UL Series Operation Manual

GD310-UL series VFD
B.5 Applicable standards
The VFD complies with the following standards:
EN ISO 13849-1
IEC/EN 60204-1
IEC/EN 62061
IEC/EN 61800-3
IEC/EN 61800-5-1
IEC/EN 61800-5-2
UL 508C
C22.2 No. 274-13
B.5.1 CE marking
The CE mark is attached to the drive to verify that the drive follows the provisions of the European
Low Voltage and EMC Directives.
B.5.2 UL and CUL marking
The markings such as "UL" and "CUL" on the nameplate vary depending on actual certification status.
The AC 3PH 200V–240V and 380V–480V drive models have been certified to comply with UL
61800-5-1 and C22.2 No. 274-17, and the AC 3PH 520V–600V drive models have been certified to
comply with UL508C and C22.2 No. 274-13.
B.5.3 Compliance with the European EMC Directive
The EMC Directive defines the requirements for immunity and emissions of electrical equipment used
within the European Union. The EMC product standard (EN 61800-3) covers requirements stated for
drives. See section B.6 EMC regulations.
B.6 EMC regulations
EMC product standard (EN 61800-3) contains the EMC requirements to the VFD.
First environment: domestic environment (includes establishments connected to a low-voltage
network which supplies buildings used for domestic purposes).
Second environment includes establishments connected to a network not directly supplying domestic
premises.
Safety of machinery-safety related parts of control systems - Part 1:
general principles for design
Safety of machinery. Electrical equipment of machines. Part 1: General
requirements.
Safety of machinery – Functional safety of safety-related electrical,
electronic and programmable electronic control systems
Adjustable speed electrical power drive systems. Part 3: EMC
requirements and specific test methods
Adjustable speed electrical power drive systems – Part 5-1: Safety
requirements – Electrical, thermal and energy
Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements. Functional.
Power conversion equipment, 3rd edition.
Adjustable speed drives, 1st edition.
-229-
Technical data