P07 Group Human-Machine Interface - INVT Goodrive 310-UL Series Operation Manual

GD310-UL series VFD
Function
Name
code
Lower output
P06.27
limit of HDO
Corresponding
P06.28 HDO output of
lower limit
Upper output
P06.29
limit of HDO
Corresponding
P06.30 HDO output of
upper limit
HDO output
P06.31
filter time

P07 Group Human-Machine interface

Function
Name
code
User's
P07.00
password
Parameter
P07.01
copy
Setting range of P06.25: 0.00V–10.00V
Setting range of P06.26: 0.000s–10.000s
Setting range of P06.27: -100.0%–P06.29
Setting range of P06.28: 0.00–50.00kHz
Setting range of P06.29: P06.27–100.0%
Setting range of P06.30: 0.00–50.00kHz
Setting range of P06.31: 0.000s–10.000s
0–65535
The password protection will be valid when setting
any non-zero number.
00000: Clear the previous user's password, and
make the password protection invalid.
After the set user's password becomes valid, if the
password is incorrect, users cannot enter the
parameter menu. Only correct password can make
the user check or modify the parameters. Please
remember all users' passwords.
Retreat editing state of the function codes and the
password protection will become valid in minute. If
the valid password is available, press PRG/ESC to
enter into the editing state of the function codes, and
then "0.0.0.0.0" will be displayed. Unless input right
password, the operator cannot enter into it.
Note: restoring to the default value can clear the
password, please use it with caution.
The function code determines the manner of
parameters copy.
0: No operation
Description
Description
-74-
Function parameter
Default
Modify
value
○
0.0%
○
0.00kHz
○
100.0%
50.00kH
○
z
○
0.000s
Default
Modify
value
○
0
◎
0