INVT Goodrive 310-UL Series Operation Manual page 113

GD310-UL series VFD
Function
Name
code
Source current
P13.03
2
Shift
P13.04 frequency of
source current
Superposing
P13.05 frequency
(reserved)
Pulse
P13.06 superposing
voltage
P13.07 Reserved
Control
P13.08
parameter 1
Control
P13.09
parameter 2
P13.10 Reserved
Maladjustment
P13.11
detection time
High
frequency
P13.12
compensation
coefficient
Braking
current of
P13.13
short-circuit
Braking
retention time
P13.14
before
starting
The braking
P13.15
retention time
Source current is directional current of the magnetic
pole position. Source current 2 is valid under the
frequency point of current shifting. There is no need
to modify the value generally.
Setting range: 0.0%–100.0% (rated motor current)
Valid frequency shifting point between source current
1 and current 2.
Setting range: 0.00Hz–P00.03 (the max frequency)
200–1000Hz
0.0–300.0% (rated voltage of the motor)
0–65535
0–65535
0–655.35
0–65535
Adjust the response of anti-maladjustment. Bigger
load inertia may increase the value, but the response
will be slower.
Setting range: 0.0–10.0s
When the motor speed is faster than the rated speed,
the parameter is valid, if vibration occurs to the
motor, please adjust the parameter.
Setting range: 0–100.0%
When P01.00=0 during the starting of the VFD, set
P13.14 to a non-zero value to enter the short circuit
braking.
When the running frequency is lower than P01.09
during the stopping of the VFD, set 13.15 to a
non-zero value to enter into stopping short circuited
braking and then carry out the DC braking at the time
set by P01.12
P01.09–P01.12) .
Setting range of P13.13: 0.0–150.0% (corresponding
Description
(refer to the instruction
-105-
Function parameter
Default
Modify
value
○
10.0%
○
10.00Hz
◎
500Hz
◎
40.0%
○
0
○
0
○
2.00
○
0
○
0.5s
○
0.0%
○
0.0%
○
0.00s
of
○
0.00s