INVT Goodrive 310-UL Series Operation Manual page 87

GD310-UL series VFD
Function
Name
code
Type of the
P07.32 last but four
fault
P07.33 Running frequency at present fault
P07.34 Ramp reference frequency at present fault
P07.35 Output voltage at the present fault
P07.36 Output current at present fault
P07.37 Bus voltage at present fault
P07.38 The max temperature at present fault
P07.39 Input terminals state at present fault
P07.40 Output terminals state at present fault
P07.41 Running frequency at the last fault
P07.42 Ramp reference frequency at the last fault
P07.43 Output voltage at the last fault
P07.44 The output current at the last fault
P07.45 Bus voltage at the last fault
P07.46 The max temperature at the last fault
P07.47 Input terminals state at the last fault
P07.48 Output terminals state at the last fault
14: Phase loss on output side (SPO)
15: Rectifier module overheat (OH1)
16: Inverter module overheat (OH2)
17: External fault (EF)
18: 485 communication fault (CE)
19: Current detection fault (ItE)
20: Motor autotuning fault (tE)
21: EEPROM operation fault (EEP)
22: PID feedback offline fault (PIDE)
23: Braking unit fault (bCE)
24: Running time reached (END)
25: Electronic overload (OL3)
26: Keypad communication fault (PCE)
27: Parameter uploading fault (UPE)
28: Parameter downloading fault (DNE)
29: PROFIBUS communication fault (E-DP)
30: Ethernet communication fault (E-NET)
31: CANopen communication fault (E-CAN)
32: To-ground short-circuit fault 1 (ETH1)
33: To-ground short-circuit fault 2 (ETH2)
34: Speed deviation fault (dEu)
35: Mal-adjustment (STo)
36: Underload fault (LL)
Description
-79-
Function parameter
Default
Modify
value
●
●
0.00Hz
0.00Hz
0V
0.0A
0.0V
0.0° C
●
0
●
0
●
0.00Hz
●
0.00Hz
●
0V
●
0.0A
●
0.0V
●
0.0° C
●
0
●
0