INVT Goodrive 310-UL Series Operation Manual page 91

GD310-UL series VFD
Function
Name
code
Set running
P08.27
time
Fault reset
P08.28
times
Interval time of
automatic fault
P08.29
reset
Frequency
decreasing
ratio of the
P08.30
dropping
control
P08.31 Motor shifting
Output frequency
The set
frequency
,
Y
RO1, RO2
Setting range of P08.25: P08.26–65535
Setting range of P08.26: 0–P08.25
Pre-set running time of the VFD. When the
accumulative running time achieves the set time, the
multi-function digital output terminals will output the
signal of "running time arrival".
Setting range: 0–65535min
Fault reset times: set the automatic fault reset times.
If the reset time exceeds this set value, the VFD will
stop to wait maintenance.
Interval time of automatic fault reset: the interval
between the time when the fault occurs and the time
when the reset action occurs.
Setting range of P08.28: 0–10
Setting range of P08.29: 0.1–3600.0s
The output frequency of the VFD changes as the
load. And it is mainly used to balance the power
when several VFDs drive one load.
Setting range: 0.00–50.00Hz
Goodrive310-UL supports the shift between two
motors. This function is used to select the shifting
channel.
LED ones: shifting channel
0: terminal shifting; digital terminal is 35
1: MODBUS communication shifting
2: PROFIBUS/CANopen communication shifting
3: Ethernet communication shifting
4: Reserved
Description
Detecting
range
-83-
Function parameter
Default
value
T
T
0min
0
1.0s
0.00Hz
0
Modify
○
○
○
○
◎