Installation Manner - INVT Goodrive 310-UL Series Operation Manual

GD310-UL series VFD Installation guidelines

4.2.3 Installation manner

The VFD can be installed in three different ways, depending on the frame size:
a) Wall mounting (for the VFDs of 220V ≤55kW; 460V G-type≤200kW, P-type≤220kW and 575V)
b) Flange mounting (for the VFDs of 220V ≤55kW; 460V G-type≤200kW, P-type≤220kW and 575V)
c) Floor mounting (for the VFDs of 460V G-type 220–500kW, P-type 250–500kW)
Figure 4-2 Installation manner
(1) Mark the hole location. The location of the holes is shown in the dimension drawings in the
Appendix C.
(2) Fix the screws or bolts to the marked locations.
(3) Put the VFD against the wall.
(4)Tighten the screws in the wall securely.
Note:
The flange installation of the VFDs of 220V 0.75–15kW and
460V G-type 1.5–30kW, P-type 5.5–37kW need flange board, while the flange installation of the VFDs
of 220V 18.5–55kW and 460V G-type 37–200kW, P-type 45–220kW does not need.
-18-