INVT Goodrive 310-UL Series Operation Manual page 75

GD310-UL series VFD
Function
Name
code
Switch-on
P05.14 delay of S1
terminal
Switch-off
P05.15 delay of S1
terminal
Switch-on
P05.16 delay of S2
terminal
Switch-off
P05.17 delay of S2
terminal
Switch-on
P05.18 delay of S3
terminal
Switch-off
P05.19 delay of S3
terminal
Switch-on
P05.20 delay of S4
terminal
Sln FWD
OFF→ON
ON
ON
OFF
ON→OFF
Note: for the 2-wire running mode, when FWD/REV
terminal is valid, the VFD stop because of the
stopping command from other sources, even the
control terminal FWD/REV keeps valid; the VFD
won't work when the stopping command is canceled.
Only when FWD/REV is re-launched, the VFD can
start again. For example, the valid STOP/RST stop
when PLC signal cycles stop, fixed-length stop and
terminal control (see P07.04).
The function code defines the corresponding delay
time of electrical level of the programmable terminals
from switching on to switching off.
Si electrical level
Si valid invalid
Switcn-on
delay
Setting range: 0.000–50.000s
Description
REV Direction
ON
OFF
OFF→
ON
ON
Decelerate
valid
Switcn-off
delay
-67-
Function parameter
Default
value
Forward
Reverse
Forward
Reverse
to stop
0.000s
0.000s
0.000s
0.000s
invalid
0.000s
0.000s
0.000s
Modify
○
○
○
○
○
○
○