Cabletron Systems SmartSwitch 9W006 User Manual page 94

USER'S GUIDE
6. If you made any changes to the configuration, download the updated configuration files to the
effected site.
For more detailed instructions, refer to the following sections in the SFVRA Configuration Manager
User's Guide:
• For network interfaces: refer to Configuring IPX Network System Interfaces in the Configuring IPX
Network Information chapter.
• For downloading configuration files: refer to Downloading Configuration Updates in the
Exporting Configuration Files chapter.
Problem:
Data is not forwarded from the remote bridge to the router over the Remote LAN interface.
Action:
Check the configuration:
1. Verify Remote LAN interface configuration. Refer to the
regarding checking an interface's configuration.
2. Verify device configuration on remote bridge. Bridge devices should be configured to make
calls over the interface defined to go to the router.
Problem:
The router does not forward typical data (RIP, SAP, Type 20 packets) to the remote bridge.
Action:
1. Make sure a call is up. Remember, the router cannot forward data if there is no previous
connection (i.e., router currently does not support dial-out).
2. Check IPX device information on the router side. Instructions for accessing the device's IPX
information are on
Problem:
Data is not received by a remote client (or server) on a Remote LAN network, but the call does come
up between the router and the remote bridge.
Action:
1. Double check and resolve any configuration/connection problems for the client (or server) to
the bridge on the Remote LAN. (Basically, eliminate the possibility of any LAN configuration
problems which are unrelated to the Remote LAN interface).
2. If you determine the problem is related to the Remote LAN, verify the IPX Network Number
for the remote bridge in the router's configuration (under bridging properties). Refer to
93 for instructions on checking the IPX Network Number.
94 SmartSwitch Remote Access Module
page 93.
above action for instructions
page