System Commands; Overview; Viewing Operational Information - Cabletron Systems SmartSwitch 9W006 User Manual

S C
YSTEM OMMANDS
O
VERVIEW
Two classes of system administration commands are available on the SmartSwitch Remote Access
Module: guest commands and administrator commands. Guest commands provide current
operational information only, and are available to all security levels. Administrator commands
allows access to the complete system command set.
You need an active administration session to issue these commands. Instructions for establishing
an administration session are provided in
The log-in to the system controls command access. Each access level (guest or administrator) is
protected by a unique log-in password. This capability allows managers to assign different
responsibility levels to their system administrators.
General operation commands immediately follow this discussion. These commands are divided by
functions. Specific feature commands begin on
alphabetically. For a tabularized listing of system commands, refer to the
Note: When there are a group of related commands, a help screen is available. For example, to
display the help screen for all of the br commands, enter br? at the system prompt.A
screen will then be displayed that includes the available br commands, the syntax for each
command, and a definition for each command.
A A
CCESSING DMINISTRATION
SmartSwitch Remote Access Module software must be running in order to access Administration
Services. To start the system, type start_ne at the DOS prompt.
The following commands are available for system login:
admin
Logs you into the system and provides access to all system commands. The system will ask you
to enter or set the password for administrator level access. Be careful, passwords are uppercase
and lowercase sensitive.
admin<00><01><02>...<99>
If you have configured multiple administration login names on your off-node server, you must
use one of the configured names to log into the SmartSwitch Remote Access Module. The
acceptable names are admin00 through admin99. Proper login provides you with access to all
system commands. The system will ask you to enter or set the password for administrator level
access. Be careful, passwords are uppercase and lowercase sensitive. (Note: This command is
not available for local access.)
guest
Logs you into the system and allows the user access to the commands for viewing operational
information only. All other commands for changing information on the system are not
Accessing the SmartSwitch Remote Access
page 209. These commands are arranged
S
ERVICES
Module.
Command Table.