Module Specifications; Module Interfaces; Module Leds - Cabletron Systems SmartSwitch 9W006 User Manual

USER'S GUIDE
M S
ODULE PECIFICATIONS
Physical Characteristics
Height:
Width:
Depth:
Weight:
Environmental Characteristics
Operating Temp:
Operating Humidity:
Regulatory Compliance
Meets or exceeds the following:
Safety:
EMI:
M I
ODULE NTERFACES
The SmartSwitch Remote Access Module includes the possibility of four flexible WAN interfaces
providing ISDN, analog modem (via digital modem), and T1/E1 or channelized T1 access. As
described earlier, depending on the model, the module may have one of the following interface
configurations:
• four PRI interfaces
• two PRI interfaces
• two PRI interfaces and two digital modems
PRI interfaces provide the module with an interface to telephone company-supplied ISDN Primary
Rate Interface (PRI) lines, or with unchannelized or channelized T1/E1 lines. Each PRI interface
supports up to 23 B channels for data and a 64Kbps signaling D channel (for countries using T1
lines), or up to 30 B channels for data and a 64 Kbps signaling D channel (for countries using E1
lines). The module uses the B channels for switched connections to carry device data. PRI interfaces
have an external port for connecting to the Telco interface.
Digital modem interfaces allow the SmartSwitch Remote Access Module to receive calls from
asynchronous PPP remote devices connected by modem. Each digital modem interface supports
up to 24 56Kbps modem connections (for countries using T1 lines), or up to 30 56Kbps modem
connections (for countries using E1 lines). Digital modem interfaces are connected internally to the
PRI interface eliminating the need for separate analog telco connections.
M LED
ODULE S
The 9W006 and 9W007 has LEDs for the following functions: SMB, power, and Ethernet activity.
Refer to the illustration of the
following sections.
28 SmartSwitch Remote Access Module
45.72 cm (18 in)
13.97 cm (5.5 in)
44.45 cm (17.5 in)
10.35 kg maximum (23 lb.)
5 to 40 C (41 to 104 F)
20 to 95% non-condensing
UL 1950, CSA C22.2 No. 950, EN 60950, IEC 950,
and 72/23/EEC
FCC Part 15, EN 55022, CSA 108.8, EN 50082-1,
VCCI V-3, and 89/336/EEC
9W0006-400 for LED locations. We describe these LEDs in the